Technicial Specifications
| Net Power Range (Tier 3) | 131 kW |
| Displacement | 7 l |
| Derating Altitude | 4500 m |
| Note (2) | Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
| Stroke | 135 mm |
| Maximum Torque - ISO 9249 | 889 N·m |
| Note (4) | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. |
| Standard Capability | 43 °C |
| Bore | 105 mm |
| Engine Model | Cat 7.1 |
| Torque Rise - ISO 9294 | 40% |
| Engine RPM | 2,200 |
| Note (1) | Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
| Note (3) | Power as declared per ISO 14396 |
| Emissions | U.S. EPA Tier 3/EU Stage IIIA |
| Number of Cylinders | 6 |
| Operating Weight - Typically Equipped | 17305 kg |
| Blade Width | 3.7 m |
| Throat Clearance | 112 mm |
| Arc Radius | 413 mm |
| Blade Height | 509 mm |
| End Bit | 152 mm |
| Cutting Edge Width | 152 mm |
| Note | Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, ROPS closed cab, rear ripper/scarifier, 4.3 m (14 ft) blade, 17.5-25 MP tires on multi-piece rims and other equipment. |
| Weight* | 17440 kg |
| Maximum Depth of Cut | 735 mm |
| Moldboard Side Shift Right | 512 mm |
| Maximum Lift Above Ground | 480 mm |
| Moldboard Side Shift Left | 663 mm |
| Circle Center Shift Left | 752 mm |
| Blade Tip Range Forward | 40 |
| Blade Tip Range Backward | 5 |
| Circle Center Shift Right | 728 mm |
| Maximum Shoulder Reach Left | 1764 mm |
| Maximum Shoulder Reach Right | 1928 mm |
| Note | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. |
| Width | 2428 mm |
| Length of Machine* | 10322 mm |
| Maximum Height | 3839 mm |
| Note | *Typically equipped with push block and ripper. |
| Circle Drive with Slip Clutch | 7.5 l |
| Hydraulic System | 45 l |
| Transmission | 18 l |
| Cooling System | 10.6 gal (US) |
| Circle Drive without Slip Clutch | 1.5 l |
| Fuel Tank | 297 l |
| Engine Crankcase | 21 l |
Advantages and Features
Built to Perform
- Increase your fuel economy up to 5% with the standard Eco mode.
- The on-demand fan reduces fuel consumption and under-hood heat for longer component life.
- Improve productivity with the Electronic Throttle Control which matches engine power and torque to application requirements.
- The powershift transmission and machine balanced design ensures that you get full drawbar power to the ground with the Cat C7.1 engine.
- The all-wheel drive (AWD) option assists with traction and maneuvering in loose material. The increased power with all-wheel drive handles rough terrain with extra traction for better productivity.
- The hydraulic system makes the machines more precise and predictable for a consistent grade.
- The Digital Blade Slope Meter option shows you the grade without relying on manual grade checkers.
- Product Link provides location, machine hours, fuel usage, productivity, idle time, diagnostic codes, and other machine data on demand through the VisionLink� online interface, which helps you improve jobsite efficiency with lower operating costs.
Work in Comfort
- Choose your comfort level in the cab with standard, mechanical suspension or air suspension seat.
- Easily adjust the control console and steering wheel.
- The high capacity Heating, Ventilation and Air Conditioning (HVAC) system option circulates fresh air, prevents dust entry and keeps windows from fogging.
- Easily add a radio to the cab using the built-in mounting location option.
- Quickly find your current gear in the front display.
Long Term Value and Durability
- Drawbar circle moldboard stays factory tight providing precision grading pass after pass.
- Machine structure is built for a long life. It's designed to use several types of work tools, such as a front blade.
- Slip clutch option protects the circle drive if the machine strikes an immovable object.
- Front axle maximizes bearing life while also minimizing maintenance.
- Reduce daily greasing requirements and costly repairs to your circle and pinion with Circle Saver option.
Safely Home Every Day
- See what's behind you with the rear camera option. The dedicated display can be always on to ensure a safe work environment.
- The heated lens keeps the rearview camera clear in cold and wet conditions.
- In the event of an engine stall, count on the secondary steering system option to help stop the machine safely.
- Use three points of contact when entering and exiting the machine with strategically placed walk ways and grab rails.
- Ground level engine shut-off switch stops all fuel to the engine when activated and shuts down the machine.
- See the rear of your machine with side and rearview mirrors.
- Work past sundown using the strategically placed lights for night time visibility.
- The new hydraulic system includes integrated work port pressure relief, an integrated dead engine implement lower, and reduction in leak points for safety and quality.
- The optional four-point safety harness seat belt provides extra protection.
- Keep your work site safer with Cat Grade Digital Blade Slope Meter to reduce the need for manual grade checking with working machines.
Save Maintenance Time
- Filters, such as fuel, engine air, and oil filters, are grouped together for easy access and preventative maintenance.
- Maintain roads with the standard drawbar circle moldboard with hardened circle teeth for increased durability. Adding a separate line with replaceable wear inserts helps to sustain factory tightness.
- Hydraulic brakes are well oiled to keep them maintenance free.
- The standard bottom guard shields the transmission and filter. Optional guarding protects your machine from damage in demanding applications.
- The new hydraulic system includes integrated work port pressure relief, an integrated dead engine implement lower, and reduction in leak points for safety and quality.
Expand Your Capabilities
- Improve the performance and efficiency of your machine with the counterweight or push block option.
- Ripper and scarifier options are available to assist with grading hard ground.
- The front lift group option is ready for attachments like the straight or angle front blade.
- For more road coverage, add a moldboard extension to add 605 mm (24 in).
Standard Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
Cab
- Standard Seat
- Steering Wheel / Lever Controls
- Base Cab
- Information Display Screen
- Halogen Lighting
- Entertainment Radio Ready
- Product Link
- Cell Phone Holder
-
Engine
- Cat C7.1
- Eco mode
- On-Demand Fan
-
Drawbar Circle Moldboard
- Standard
-
Safety
- Parking Brake
- Signaling / Warning Horn
- Rearview Mirror
- Hydraulic Brakes
- Sideview Mirrors
- Walkways and Grab Rails
-
Versatility
- Front Bolster
Optional Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
Cab
- Mechanical Suspension Seat
- Air Suspension Seat
- ROPS/FOPS
- Heating/Cooling Cab System
- Rear Wiper
- Canopy
- Cab Plus
- Rear Window Screen
- Front Wipers
- Digital Blade Slope Meter
-
Drawbar Circle Moldboard
- Circle Drive Slip Clutch
- Circle Saver
-
Safety
- Rearview Camera
- Secondary Steering System
- Cat Detect with Vision System
-
Versatility
- Counterweight
- Push Block
- Ripper
- Scarifier
- Front Lift Group From Factory
- Front Blade
- Mast Type - Snow Wing
- Mastless - Snow Wing
- Ripper/Scarifier
- Auxiliary Hydraulic Lines
- Moldboard Extension
- Reversing Fan
- L3 Tires
- Sy-Klone Pre-Cleaner
-
Engine
- All-Wheel Drive (AWD)
- All-Wheel Drive (AWD)
-
VERSATILITY
- Front Blade
