- Borusan Cat

Technicial Specifications

Engine

Power - Net	— 66 kW
Model	— Cat 3054C Mechanical Turbo
Emissions	— Engine meets U.S. EPA Tier 2/EU Stage II equivalent emission standards.
Rated Power (Standard) - 2,200 rpm - Gross - ISO 14396	— 68.5 kW
Net Power - 2,200 rpm - ISO 9249	— 66 kW
Net Peak Power - 2,000 rpm - SAE J1349	— 65 kW
Net Peak Power - 2,000 rpm - ISO 9249	— 65 kW
Net Peak Power - 2,000 rpm - EEC 80/1269	— 65 kW
Torque Rise - 1,200 rpm - Net	— 38%
Maximum Torque - 1,400 rpm	— 394 N·m
Bore	— 105 mm
Stroke	— 127 mm
Displacement	— 4.4 l
Note (1)	— Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
Note (2)	— No derating required up to 2286 m altitude. Auto derate protects hydraulic and transmission systems.

Weights

Operating Weight - Nominal	— 7990 kg
Operating Weight - Maximum	— 8760 kg

Hydraulic System

Type	— Closed Center
Pump Type	— Variable Flow, Axial Piston
Maximum Pump Capacity	— 132 l/min
System Pressure - Backhoe	— 250 bar
System Pressure - Loader	— 250 bar

Noise Level

Inside Cab	— 80 dB(A)
Outside Cab	— 104 dB(A)

Transmission

Note	— Travel speeds of Two Wheel Drive backhoe loader at full throttle, when equipped with 16.9×28 rear tires.
Power Shuttle Transmission - Forward 1st	— 5.5 km/h
Power Shuttle Transmission - Forward 2nd	— 9 km/h
Power Shuttle Transmission - Forward 3rd	— 20.7 km/h
Power Shuttle Transmission - Forward 4th	— 40 km/h
Power Shuttle Transmission - Reverse 1st	— 5.5 km/h
Power Shuttle Transmission - Reverse 2nd	— 9 km/h
Power Shuttle Transmission - Reverse 3rd	— 20.7 km/h
Power Shuttle Transmission - Reverse 4th	— 40 km/h

Service Refill Capacities

Cooling System	— 22 l
Fuel Tank	— 160 l
Engine Oil - With Filter	— 8.8 l
Transmission - Power Shuttle - AWD	— 15 l
Rear Axle	— 14.5 l
Rear Axle - Planetaries	— 1.5 l
Front Axle (AWD)	— 11 l
Front Axle (AWD) - Planetaries	— 0.7 l
Hydraulic System	— 106 l
Hydraulic Tank	— 40 l

Weights*

Operating Weight - Estimated	— 7990 kg
Operating Weight - ROPS Capacity - Maximum	— 8760 kg
Counterweights - Base	— 115 kg
Counterweights - Medium	— 240 kg
Minimum Counterweight Recommendations - Standard Stick: Loader Bucket - GP	— 115 kg
Minimum Counterweight Recommendations - Standard Stick: Loader Bucket - MP	— 0 kg
Note	— *Machine Configuration – standard engine, standard stick hoe, standard cab with A/C, AWD standard shift transmission, 0.96 m³ MP loader bucket, 610 mm standard duty hoe bucket, 12.5/80-18 and 16.9-28 tires, no counterweight, 80 kg operator and full fuel tank.

Axles - All Wheel Drive (AWD)

Features (1)	— Heavy-duty rear axle with self adjusting inboard brakes, differential lock and final drives.
Features (2)	— AWD is engaged by front console panel switch or by brake pedal during all-wheel-braking operation. AWD can be engaged on the move, under load, in any gear, forward or reverse. AWD has outer final drives for easy maintenance.
Features (3)	— AWD front axle is pendulum mounted and permanently sealed and lubricated, requiring no daily maintenance. Also features double-acting steering cylinder with 52° steering angle for increased maneuverability.

Axle Ratings

Front Axle (AWD) - Static	— 22943 kg
Front Axle (AWD) - Dynamic	— 9177 kg
Rear Axle - Static	— 19120 kg
Rear Axle - Dynamic	— 7648 kg

Steering

Type	— Front Wheel
Power Steering	— Hydrostatic
AWD Cylinder, One (1) Double Acting - Bore	— 65 mm
AWD Cylinder, One (1) Double Acting - Stroke	— 120 mm
AWD Cylinder, One (1) Double Acting - Rod Diameter	— 36 mm
Turning Circle (inner wheel not braked) - Outside Front Wheels	— 8.18 m
Turning Circle (inner wheel not braked) - Outside Widest Loader Bucket	— 10.97 m

Brakes

Type	— Fully enclosed boosted, hydraulic, multiple discs.
Features (1)	— Inboard oil-immersed, hydraulically actuated multiple Kevlar discs on final drive input shaft.
Features (2)	— Completely enclosed and sealed.
Features (3)	— Self-adjusting.
Features (4)	— Dual foot-operated boosted brake pedals can be interlocked for roading.
Features (5)	— Parking/secondary brakes are independent of the service brake system. Parking brake is mechanically applied through a hand lever located in the right side console.
Features (6)	— Meets ISO 3450:1996 requirements.

Machine Dimensions - GP - 1.0 m3

Overall Length - In Roading Position	— 5726 mm
Overall Transportation Length	— 5678 mm
Overall Transportation Height - 4.3 m	— 3757 mm
Overall Width - Excluding Loader Bucket	— 2346 mm
Height - Top of Cab/Canopy	— 2869 mm
Height - Top of Exhaust Stack	— 2716 mm
Rear Axle - Centerline to Front Grill	— 2708 mm
Wheelbase - AWD	— 2200 mm
Note	— Dimensions and performance specifications shown are for machines equipped with 12.5/80-18 SGL front tires, 16.9-28c rear tires, standard cab, standard stick with 610 mm standard duty bucket, and 1.05 m³ GP loader bucket and standard equipment unless otherwise specified.

Machine Dimensions - MP - 0.96 m3

Overall Length - In Roading Position	— 5682 mm
Overall Transportation Length	— 5675 mm
Overall Transportation Height - 4.3 m	— 3757 mm
Overall Width - Excluding Loader Bucket	— 2346 mm
Height - Top of Cab/Canopy	— 2869 mm
Height - Top of Exhaust Stack	— 2716 mm
Rear Axle - Centerline to Front Grill	— 2708 mm
Wheelbase - AWD	— 2200 mm
Note	— Dimensions and performance specifications shown are for machines equipped with 12.5/80-18 SGL front tires, 16.9-28c rear tires, standard cab, standard stick with 610 mm standard duty bucket, and 1.05 m³ GP loader bucket and standard equipment unless otherwise specified.

Loader Bucket Dimensions and Performance: GP - 1.05 m3

Capacity	— 1.05 m³
Width	— 2262 mm
Lift Capacity at Maximum Height	— 3610 kg
Lift Breakout Force	— 54.46 kN
Tilt Breakout Force	— 53.92 kN
Tipping Load - Breakout Point	— 7012 kg
Maximum Hinge Pin Height	— 3447 mm
Dump Angle at Full Height	— 46°
Dump Height at Maximum Angle	— 2733 mm
Dump Reach at Maximum Angle	— 900 mm
Maximum Bucket Rollback at Ground Level	— 38°
Digging Depth	— 88 mm
Maximum Grading Angle	— 113°
Grill to Bucket Cutting Edge, Carry Position	— 1482 mm
Maximum Operating Height	— 4368 mm
Bucket Weight - Excluding Teeth and Forks	— 428 kg

Loader Bucket Dimensions and Performance: MP - 1.0 m3

Capacity	— 0.96 m³
Width	— 2262 mm
Lift Capacity at Maximum Height	— 3475 kg
Lift Breakout Force	— 54 kN
Tilt Breakout Force	— 60.48 kN
Tipping Load - Breakout Point	— 7110 kg
Maximum Hinge Pin Height	— 3447 mm

Loader Bucket Dimensions and Performance: MP - 0.96 m3

Dump Angle at Full Height	— 46°
Dump Height at Maximum Angle	— 2764 mm
Dump Reach at Maximum Angle	— 825 mm
Maximum Bucket Rollback at Ground Level	— 39°
Digging Depth	— 147 mm
Maximum Grading Angle	— 116°
Grill to Bucket Cutting Edge, Carry Position	— 1450 mm
Maximum Operating Height	— 4368 mm
Bucket Weight - Excluding Teeth and Forks	— 611 kg

Backhoe Dimensions and Performance - Standard Stick - 4.3 m

Digging Depth - SAE Maximum	— 4119 mm
Digging Depth, Manufacturer's Maximum	— 4709 mm
Digging Depth - 2440 mm Flat Bottom	— 3743 mm
Digging Depth - 600 mm Flat Bottom	— 4094 mm
Digging Depth, 600 mm Flat Bottom, Manufacturer's	— 4670 mm
Reach from Swing Pivot at Ground Line	— 5609 mm
Maximum Operating Height	— 5719 mm
Loading Height	— 4031 mm
Loading Reach	— 1477 mm
Swing Arc	— 180°
Bucket Rotation	— 205°
Stabilizer Overall Width	— 2242 mm
Bucket Dig Force	— 57.22 kN
Stick Dig Force	— 35.29 kN

Product Link™

Get the most out of your Cat® Backhoe Loader. Product Link provides quick access to vital information such as machine location, hours worked, machine error codes and fuel burn to help you maximize machine performance.

Cab and Controls

The introduction of the new cab to the Cat Backhoe Loader provides a comfortable and easy to use operator environment. With the ability to customize your experience, the all new cab allows the operator to perform in greater comfort and enjoy the latest technologies available on today's generation of backhoe loaders.

Powerful Hydraulics

The F2 Series machines really make an impact. High pump flow in a superior hydraulic system allow the operator excellent hydraulic performance at their fingertips.

Power Train

The 426F2 is equipped with our tried and tested Cat 3054C engine and is finely tuned to a Cat four speed manual transmission. This fine tuning enables the 426F2 to reach a 40 km/h roading speed.

Equipment

Standard Equipment

Cab ROPS and FOPS
- Canopy

Tires/Steering/Brakes
- Two Wheel Drive
- 100% Differential Lock
- Hydraulic Boosted Brakes (dual pedals)
- Tires 16 inch (Front) – 2WD
- Tires 18 inch (Front) – AWD
- Tires 28 inch (Rear)

Engine/Transmission
- Battery 750 CCA, Maintenance Free (standard)
- Hinged Radiator Unit for Simple Debris Removal
- Engine 68.5 kW (93 hp) Cat 3054C
- Transmission, 4-Speed Manual

Input
- Controls, Mechanical Lever
- Power Steering, Hydrostatic

Other Attachments
- Tool Storage Box
- Transport Tie-downs

Guards
- Loader Safety Brace

Boom, Sticks and Linkages – Backhoe
- Stick, Standard (4.26 m)
- Transport Lock, Swing
- Transport Lock, Boom

Hydraulics
- Hydraulic Pump (132 L/min)
- Side Shift Lock (electro-hydraulic)
- Hydraulic Oil Cooler

Hydraulics – Loader
- Loader Kickout, Float
- Parallel Lift

Electrical
- Product Link, Cellular
- Reversing Alarm

Optional Equipment

Cab ROPS and FOPS
- Cab, Standard

Tires/Steering/Brakes
- All Wheel Drive

Other Attachments
- Counterweight, 115 kg
- Counterweight, 240 kg

Guards
- Guard, Driveshaft

Hydraulics – Backhoe
- Hydraulic Lines, 1-Way
- Hydraulic Quick Disconnects (twist to connect)

Electrical
- Beacon, Rotating

360 Degrees

Documents

426F2 Small Product Brochure

Complete 426F2 Small Product Brochure

426F2 Large Product Brochure

Complete 426F2 Large Product Brochure

Options and Accessories Kit Guide for Backhoe Loaders

Related products

Buckets - Backhoe Front

Designed to efficiently load and carry a wide variety of materials.

Model	WIDTH	HEIGHT	WEIGHT
1.0 m3 (1.3 yd3), Parallel Lift Pin On, Base Edge	89.1 in - 2262 mm	33 in - 839 mm	965.6 lb - 438 kg
0.96 m3 (1.3 yd3), Parallel Lift Pin On, Base Edge, Heavy Duty	89.1 in - 2262 mm	33 in - 839 mm	1128.8 lb - 512 kg
1.03 m3 (1.35 yd3), Parallel Lift Pin On, Base Edge, Fork Brackets	94.7 in - 2406 mm	40.8 in - 1037 mm	1510.2 lb - 685 kg

Buckets - Backhoe Rear

Variety of styles accommodates most jobsite needs.

Model	WIDTH	CAPACITY	WEIGHT
305 mm (12 in), Pin On	12 in - 305 mm	2.3 ft³ - 65 l	271.2 lb - 123 kg
230 mm (9 in) Pin On	9.1 in - 230 mm	2.1 ft³ - 60 l	319.7 lb - 145 kg
1200 mm (47 in), Pin On	47.2 in - 1200 mm	7.8 ft³ - 220 l	273.4 lb - 124 kg
1400 mm (55 in), Pin On	55.1 in - 1400 mm	9.2 ft³ - 260 l	304.2 lb - 138 kg
1400 mm (55 in), Pin On	55.1 in - 1400 mm	9.2 ft³ - 260 l	304.2 lb - 138 kg
1500 mm (59 in), Pin On	59.1 in - 1500 mm	10.2 ft³ - 290 l	319.7 lb - 145 kg
1600 mm (63 in), Pin On	63 in - 1600 mm	10.9 ft³ - 310 l	335.1 lb - 152 kg
1800 mm (71 in), Pin On	70.9 in - 1800 mm	12.4 ft³ - 350 l	366 lb - 166 kg
305 mm (12 in), 80 L (2.8 ft3), Pin On, Weld-On Adapters	12 in - 305 mm	2.8 ft³ - 80 l	216.1 lb - 98 kg
305 mm (12 in), 80 L (2.8 ft3), Pin On, Bolt-On Teeth	12 in - 305 mm	2.8 ft³ - 80 l	218.3 lb - 99 kg
305 mm (12 in), 80 L (2.8 ft3), Pin On, Bolt-On Teeth	12 in - 305 mm	2.8 ft³ - 80 l	211.6 lb - 96 kg
305 mm (12 in), 68 L (2.4 ft3), Pin On, Weld-On Adapters	12 in - 305 mm	2.4 ft³ - 68 l	227.1 lb - 103 kg
408 mm (16 in), 110 L (3.9 ft3), Pin On, Weld-On Adapters	16.1 in - 408 mm	3.9 ft³ - 110 l	249.1 lb - 113 kg
458 mm (18 in), 120 L (4.2 ft3), Pin On, Weld-On Adapters	18 in - 458 mm	4.2 ft³ - 120 l	266.8 lb - 121 kg
458 mm (18 in), 120 L (4.2 ft3), Pin On, Bolt-On Teeth	18 in - 458 mm	4.2 ft³ - 120 l	260.1 lb - 118 kg
610 mm (24 in), 180 L (6.4 ft3), Pin On, Bolt-On Teeth	24 in - 610 mm	6.4 ft³ - 180 l	308.6 lb - 140 kg
610 mm (24 in), 180 L (6.4 ft3), Pin On, Weld-On Adapters	24 in - 610 mm	6.4 ft³ - 180 l	315.3 lb - 143 kg
762 mm (30 in), 280 L (9.9 ft3), Pin Lock, Weld-On Adapters	30 in - 762 mm	9.9 ft³ - 280 l	443.1 lb - 201 kg
762 mm (30 in), 230 L (8.1 ft3), Pin On, Weld-On Adapters	30 in - 762 mm	8.1 ft³ - 230 l	354.9 lb - 161 kg
762 mm (30 in), 230 L (8.1 ft3), Pin On, Bolt-On Teeth	30 in - 762 mm	8.1 ft³ - 230 l	357.1 lb - 162 kg
800 mm (32 in), 250 L (8.8 ft3), Pin On, Weld-On Adapters	31.5 in - 800 mm	8.8 ft³ - 250 l	366 lb - 166 kg
914 mm (36 in), 340 L (12 ft3), Pin Lock, Weld-On Adapters	36 in - 914 mm	12 ft³ - 340 l	509.3 lb - 231 kg
914 mm (36 in), 290 L (10.2 ft3), Pin On, Weld-On Adapters	36 in - 914 mm	10.2 ft³ - 290 l	403.4 lb - 183 kg
914 mm (36 in), 290 L (10.2 ft3), Pin On, Bolt-On Teeth	36 in - 914 mm	10.2 ft³ - 290 l	454.2 lb - 206 kg
457 mm (18 in), 180 L (6.4 ft3), Pin On, Weld-On Adapters	18 in - 457 mm	6.4 ft³ - 181 l	321.9 lb - 146 kg
762 mm (30 in) Pin On	30 in - 762 mm	11.3 ft³ - 320 l	434.3 lb - 197 kg
458 mm (18 in), Pin On	4.5 in - 458 mm	4.2 ft³ - 120 l	1009.7 lb - 114 kg
610 mm (24 in), Pin On	5.2 in - 610 mm	6.4 ft³ - 180 l	1344.8 lb - 133 kg
762 mm (30 in), Pin On	6 in - 762 mm	8.1 ft³ - 230 l	1679.9 lb - 152 kg
914 mm (36 in), Pin On	6.8 in - 914 mm	10.2 ft³ - 290 l	2015 lb - 172 kg
305 mm (12 in), Pin On	12 in - 305 mm	2.8 ft³ - 80 l	211.6 lb - 96 kg
1200 mm (47 in), Pin On, Bolt-On Cutting Edge	47.2 in - 1200 mm	14.6 ft³ - 413 l	632.7 lb - 287 kg
1500 mm (59 in), Pin On, Bolt-On Cutting Edge	59.1 in - 1500 mm	18.6 ft³ - 527 l	743 lb - 337 kg
305 mm (12 in), Pin On	12 in - 305 mm	2.5 ft³ - 71 l	249.1 lb - 113 kg
457 mm (18 in), Pin On	18 in - 457 mm	4.6 ft³ - 130 l	304.2 lb - 138 kg
610 mm (24 in), Pin On	24 in - 610 mm	7 ft³ - 198 l	381.4 lb - 173 kg
762 mm (30 in), Pin On	30 in - 762 mm	9.5 ft³ - 269 l	396.8 lb - 180 kg
914 mm (36 in), Pin On	36 in - 914 mm	11.5 ft³ - 325 l	451.9 lb - 205 kg
305 mm (12 in), Pin On	12 in - 305 mm	2.8 ft³ - 79 l	213.8 lb - 97 kg
457 mm (18 in), Pin On	18 in - 457 mm	4.2 ft³ - 119 l	253.5 lb - 115 kg
610 mm (24 in), Pin On	24 in - 610 mm	6.2 ft³ - 176 l	291 lb - 132 kg
762 mm (30 in), Pin On	30 in - 762 mm	8.2 ft³ - 232 l	324.1 lb - 147 kg
914 mm (36 in), Pin On	36 in - 914 mm	10.3 ft³ - 292 l	363.8 lb - 165 kg

Couplers - Backhoe Rear

Quick Couplers increase the performance of Cat® Backhoes by allowing fast and easy bucket changes in the field.

Model	WEIGHT	WIDTH	LENGTH
415-444 Backhoe Loaders Manual	191.8 lb - 87 kg	14.1 in - 359 mm	24.2 in - 615 mm
415-444 Backhoe Loaders Hydraulic	200.6 lb - 91 kg	14.1 in - 359 mm	24.2 in - 615 mm

Hammers

Cat® hydraulic hammers make short work of your demolition, construction, quarry and production breaking needs.

Cat Hammers are high performance breakers, designed to help you get the most from your Cat equipment. With hammer sizes to fit skid steers, backhoes, and all sizes of excavators, you will find the breaker to fill your demolition, construction, quarry and production breaking needs.

Model	OPERATING WEIGHT - WITH TOOL	ENERGY CLASS	MACHINE CLASS
B6s	610.7 lb - 277 kg	501.5 ft·lbf - 680 J	4-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders
B8	771 lb - 349.7 kg	848.2 ft·lbf - 1150 J	6-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders
B8 Side Mount	802.5 lb - 364 kg	848.2 ft·lbf - 1150 J	415-444 Backhoe Loaders
B8s	758.4 lb - 344 kg	848.2 ft·lbf - 1150 J	6-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders
B9	1166.2 lb - 529 kg	958.8 ft·lbf - 1300 J	7-10 Ton Mini Excavators, 415-450 Backhoe Loaders (no side shift)
B9s	1142 lb - 518 kg	958.8 ft·lbf - 1300 J	7-10 Ton Mini Excavators, 415-450 Backhoe Loaders (No Side Shift)
H65s	859.8 lb - 390 kg	800.3 ft·lbf - 1085 J	5-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders
H80s	937 lb - 425 kg	1000.1 ft·lbf - 1356 J	7-9 Ton Mini Excavators, 415-450 Backhoe Loaders

Rippers / Scarifiers

Ripper teeth break up hard soil and ice.

Model	SHANK LENGTH	WEIGHT	OVERALL LENGTH
639 mm (25 in)	25.2 in - 639 mm	240.3 lb - 109 kg	32.8 in - 833 mm

Cold Planers

High speed drum and conical bits quickly remove asphalt and concrete prior to resurfacing.

Model	WORKING WIDTH	MAXIMUM CUTTING DEPTH	REQUIRED HYDRAULICS
PC404	17.7 in - 450 mm	4.9 in - 125 mm	Standard Flow

Business Machines

426F2

426F2

Technicial Specifications

Technicial Specifications

Advantages and Features

Advantages and Features

Product Link™

Cab and Controls

Powerful Hydraulics

Power Train

Equipment

Standard Equipment

Optional Equipment

360 Degrees

Documents

426F2 Small Product Brochure

426F2 Large Product Brochure

Options and Accessories Kit Guide for Backhoe Loaders

Related products

Buckets - Backhoe Front

Buckets - Backhoe Rear

Couplers - Backhoe Rear

Hammers

Rippers / Scarifiers

Cold Planers

Power - Net	66 kW
Operating Weight - Nominal	7990 kg
Operating Weight - Maximum	8760 kg