Leasing calculator - will allow you to calculate the cost of your monthly payment. Leasing Calculator
Parts online

308 CR VAB

308 CR VAB

The Cat® 308 CR Variable Angle Boom (VAB) Mini Excavator delivers maximum power and performance in a mini size to help you work in a wide range of applications. The Variable Angle Boom provides the maximum in linkage flexibility in tight applications.

Net Power 51.8 kW
Operating Weight 9245 kg
Dig Depth 3815 mm

Technicial Specifications

Net Power 51.8 kW
Displacement 3.33 l
Note Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, exhaust system and fan.
Bore 94 mm
Gross Power - SAE J1995 55.4 kW
Stroke 120 mm
Net Power - 2,200 rpm - ISO 9249:2007, 80/1269/EEC 51.8 kW
Engine Model - U.S. EPA Tier 4 Final/EU Stage V Cat® C3.3B
Operating Weight 9245 kg
Note (1) *Minimum Weight is based on rubber tracks, no counterweight, operator, full fuel tank, blade, and no bucket.
Note (2) **Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, blade, and no bucket.
Maximum Operating Weight with Standard Stick** 9245 kg
Minimum Operating Weight with Standard Stick* 8655 kg
Dimensions - VAB In
Dig Depth 3815 mm
Tail Swing with Counterweight 1585 mm
Maximum Blade Height 370 mm
Track Belt/Shoe Width 450 mm
Maximum Dump Clearance 3450 mm
Vertical Wall 2520 mm
Boom in Reach 3120 mm
Ground Clearance 350 mm
Swing Bearing Height 756 mm
Boom Swing Right 935 mm
Overall Track Width 2300 mm
Overall Shipping Length 6450 mm
Transport Height 2475 mm
Cab Height 2541 mm
Overall Undercarriage Length 2880 mm
Maximum Reach 6515 mm
Tail Swing without Counterweight 1450 mm
Maximum Reach at Ground Level 6300 mm
Stick Length 1820 mm
Maximum Blade Depth 407 mm
Boom Swing Left 605 mm
Maximum Dig Height 5220 mm
Height 431 mm
Width - Wide 2450 mm
Width - Standard 2300 mm
Weight Increase from Minimum Configuration
Counterweight 250 kg
Steel Tracks with Pads 341 kg
Travel System
Maximum Traction Force - High Speed 27.8 kN
Travel Speed - Low 3.1 km/h
Ground Pressure - Maximum Weight 40.6 kPa
Travel Speed - High 5.1 km/h
Gradeability - Maximum 30 degrees
Ground Pressure - Minimum Weight 37.9 kPa
Maximum Traction Force - Low Speed 67.5 kN
Service Refill Capacities
Engine Oil 11.2 l
Cooling System 10 l
Hydraulic System 110 l
Hydraulic Tank 53 l
Fuel Tank 147 l
Hydraulic System
Digging Force - Bucket 62 kN
Operating Pressure - Equipment 285 bar
Pump Flow at 2,400 rpm 167 l/min
Operating Pressure - Travel 285 bar
Digging Force - Stick - Standard 42.3 kN
Type Load Sensing Hydraulics with Variable Displacement Piston Pump
Operating Pressure - Swing 250 bar
Note Flow and pressure are not combinable. Under load, as flow rises pressure goes down.
Maximum Auxiliary Circuit - Primary - Pressure at Pump 285 bar
Maximum Auxiliary Circuit - Secondary - Pressure at Pump 285 bar
Maximum Auxiliary Circuit - Primary - Flow at Pump 131 l/min
Maximum Auxiliary Circuit - Secondary - Flow at Pump 33 l/min
Swing System
Machine Swing Speed 10.6 r/min
Boom Swing - Right 50 degrees
Boom Swing - Left 60 degrees
Certification - Cab and Canopy
Roll Over Protective Structure (ROPS) ISO 12117-2:2008
Tip Over Protective Structure (TOPS) ISO 12117:1997
Top Guard ISO 10262:1998 (Level II)
Operator Sound Pressure (ISO 6396:2008) 72 dB(A)
Note European Union Directive "2000/14/EC"
Average Exterior Sound Pressure (ISO 6395:2008) 99 dB(A)
Air Conditioning System
Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.
Dimensions - VAB Out
Dig Depth 3460 mm
Overall Shipping Length 6450 mm
Stick Length 1820 mm
Track Belt/Shoe Width 450 mm
Swing Bearing Height 756 mm
Maximum Blade Depth 407 mm
Maximum Reach at Ground Level 7715 mm
Transport Height 2475 mm
Boom in Reach 2710 mm
Overall Undercarriage Length 2880 mm
Maximum Reach 7885 mm
Maximum Dump Clearance 6285 mm
Ground Clearance 350 mm
Vertical Wall 3725 mm
Tail Swing with Counterweight 1585 mm
Tail Swing without Counterweight 1450 mm
Boom Swing Left 605 mm
Maximum Blade Height 370 mm
Cab Height 2541 mm
Maximum Dig Height 8180 mm
Boom Swing Right 935 mm
Overall Track Width 2300 mm
Recyclability 96%

Advantages and Features


  • A sealed and pressurized cab is equipped with an improved air conditioning system, adjustable wrist rests and a suspension seat to help keep you working comfortably all day long.


  • Controls are easy to use and the intuitive Next Generation Monitor provides customizable machine operator preferences and easy to read machine information.


  • Moving around the job site is even easier with the Cat Stick Steer option. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!


  • Increased lifting, swinging, travel and multi-functioning performance help you get the job done more efficiently, and dig-to-blade allows for easy clean up.


  • Your safety is our top priority. The Cat Mini Excavator is designed to help keep you safe on the job. A back-up camera, courtesy work lights and a fluorescent retractable seat belt are just a few of the safety features we‚Äôve built into the machine.


  • Maintenance is quick and easy on the Cat Mini Excavator. Routine check points are easy to access at ground level with grouped service points and robust service panels.


  • Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat Mini Excavator was designed with reducing your operating costs in mind.


  • Your Cat dealer is here to help you reach your business goals. From providing equipment solutions to operator training to service needs and beyond, your Cat dealer is ready to help.


  • The Cat® C3.3B engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
  • Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
  • Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
  • Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
  • Cruise control helps you maintain a constant speed as you travel across your jobsite saving fuel and reducing greenhouse gas emissions.
  • The Cat® Seat Belt Reminder provides audible and visual warnings to remind operators to buckle up during machine operation. The easy-to-install system is compatible with all equipment brands to help ensure operator safety.
  • Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
  • Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.(if equipped)
  • Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.(if equipped)
  • Cat Grade with advanced 2D and 3D technologies combine advanced guidance with optional automated machine control helping you reach grading targets while reducing fuel burn and greenhouse gas emissions by improving efficiency, job site productivity, and accuracy. (if equipped).
*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. (for use of blends higher than 20% biodiesel, consult your Cat dealer)

Standard Equipment

    • Cat C3.3 Diesel Engine (U.S. EPA Tier 4 Final/EU Stage V) – Electronic Engine, Turbo, Diesel Particulate Filter (DPF)
    • Automatic Engine Idle
    • Automatic Engine Shutdown
    • Automatic Swing Brake
    • Automatic Two Speed Travel
    • Fuel Water Separator with Indicator
    • Radial Seal – Double Element Air Filter
    • Extended Life Coolant, –37° C ( –35° F)
    • Ecology Drain
    • Smart Tech Electronic Pump
    • Electronic Variable Displacement Piston Pump
    • Load Sensing/Flow Sharing Hydraulics
    • Power On Demand
    • Hydraulic Temperature Monitoring
    • Certified Accumulator
    • HYDO Advanced Hydraulic Oil
    • Top Guard ISO 10262 1998 Level I
    • ROPS ISO 12117-2:2008
    • Sealed and Pressurized Cab
    • Stick Steer Mode
    • Travel Cruise Control
    • Control Pattern Changer
    • Adjustable Wrist Rests
    • Molded Footrests
    • Removable, Washable Floor Mat
    • Travel Pedals and Hand Levers
    • Cat Key with Passcode Option
    • HVAC with Automatic Temperature Control
    • Hydraulic Lockout Controls
    • Integrated Lower Front Window
    • Assisted Front Window Overhead Storage
    • Rear Window Emergency Exit
    • Fabric, High Back, Suspension Seat
    • Retractable Seat Belt (75 mm/3 in)
    • Coat Hook
    • Cup Holder
    • LED Interior Light
    • Literature Holder
    • Mounting Bosses for Top and Front Guards
    • 12V Power Socket
    • Radio – Bluetooth, Auxiliary, Microphone, USB (charging only)
    • Skylight
    • Signaling/Warning Horn
    • Cab and (left side) Boom Work Lights
    • Utility Space for Mobile Phone
    • Next Generation Color LCD Monitor (IP66)
      – Jog Dial Interface
      – Fuel Level and Coolant Temperature Gauges
      – Maintenance and Machine Monitoring
      – Performance and Machine Adjustments
      – Numeric Security Code
      – Multiple Languages
      – Camera Ready (IP68 & IP69K)
      – Hour Meter with Wake Up Switch
    • Greased and Lubricated Track
    • Hydraulic Track Adjusters
    • Tie Down Eyes on Track Frame
    • Dozer Blade
    • Dozer Float
    • Bolt-on, Reversible Wear Edge
    • Variable Angle Boom
    • Standard Stick (1820 mm/71.7 in)
    • Front Shovel Capable – Pin-on/Manual Coupler/Hydraulic Coupler (not available in all regions)
    • Thumb Ready (not available in all regions)
    • 12 Volt Electrical System
    • 60 Ampere Alternator
    • Circuit Breaker
    • 900 CCA Maintenance Free Battery
    • Battery Disconnect
    • Ignition Key Stop Switch
    • Locks on External Enclosure Doors
    • Lockable Fuel Cap
    • Beacon Socket
    • Rear Reflectors

Optional Equipment

    • Push to Start with Bluetooth® Key
    • Air Suspension Heated Seat
    • Rain Visor
    • Next Generation Advanced Monitor (below are all included with Next Generation Advanced Monitor option)
      – Touch Screen
      – Site Reference System
      – High Definition Camera Capable (IP68 & IP69K)
      – Numeric Security Code
    • Wide Dozer Blade
    • Steel Tracks (450 mm/17.7 in wide)
    • Wide Steel Tracks (600 mm/23.6 in)
    • Steel Track with Rubber Pads
    • Track Guides
    • Attachments including Buckets, Augers and Hammers
    • 2nd Auxiliary Hydraulic Lines
    • Boom Lowering Check Valve
    • Stick Lowering Check Valve
    • Certified Lifting Eye
    • Product Link Elite (regulations apply)
    • Travel Alarm
    • Rearview Camera
    • Rotating Beacon
    • Mesh Front Guard ISO 10262 1998 Level I
    • Heavy Duty Front Guard ISO 10262 1998 Level II
    • Overhead Cab Guard ISO 10262 1998 Level II
    • Polycarbonate Front Window EN356 P5A
    • Track Guards
    • Additional Counterweight
    • Water Jacket Heater
    • Refueling Pump