Leasing calculator - will allow you to calculate the cost of your monthly payment. Leasing Calculator
Parts online
 
 
 
 
 

140 GC

140 GC

The Cat® 140 GC motor grader is easy to own and operate. It’s easy on your wallet too. A demand fan and standard ECO mode reduces fuel consumption while open access to maintenance points makes service quick and simple. Control the blade with consistent precession using lever controls from the comfort of the all new cab. Not all features available in all regions. Consult your Cat dealer for specific configurations available in your region.

Net Power Range (Tier 3) 131 kW
Weight* 17390 kg
Blade Width 3.7 m

Technicial Specifications

Engine
Net Power Range (Tier 3) 131 kW
Displacement 7.01 l
Bore 105 mm
Stroke 135 mm
Engine Model Cat 7.1
Note (1) Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Torque - ISO 9249 889 N·m
Standard Capability 43 °C
Note (4) The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.
Derating Altitude 4500 m
Number of Cylinders 6
Emissions U.S. EPA Tier 3/EU Stage IIIA
Note (3) Power as declared per ISO 14396
Note (2) Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Torque Rise - ISO 9294 40%
Engine RPM 2,200
Machine Weight
Weight* 17390 kg
Note Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, ROPS closed cab, rear ripper/scarifier, 4.3 m (14 ft) blade, 17.5-25 MP tires on multi-piece rims and other equipment.
Moldboard
Blade Width 3.7 m
Throat Clearance 112 mm
Blade Height 509 mm
End Bit 152 mm
Cutting Edge Width 152 mm
Arc Radius 413 mm
Service Refill Capacities
Circle Drive without Slip Clutch 1.5 l
Circle Drive with Slip Clutch 7.5 l
Transmission 18 l
Cooling System 10.6 gal (US)
Hydraulic System 45 l
Fuel Tank 297 l
Engine Crankcase 21 l
Blade Range
Moldboard Side Shift Left 663 mm
Maximum Depth of Cut 735 mm
Moldboard Side Shift Right 512 mm
Maximum Shoulder Reach Right 1928 mm
Maximum Lift Above Ground 480 mm
Circle Center Shift Left 752 mm
Maximum Shoulder Reach Left 1764 mm
Blade Tip Range Backward 5
Circle Center Shift Right 728 mm
Blade Tip Range Forward 40
Dimensions
Width 2428 mm
Maximum Height 3839 mm
Length of Machine* 10322 mm
Note *Typically equipped with push block and ripper.
Air Conditioning System
Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.

Advantages and Features

BUILT TO PERFORM

  • Increase your fuel economy up to 5% with the standard ECO mode.
  • The on-demand fan reduces fuel consumption and under-hood heat for longer component life.
  • Improve productivity with the Electronic Throttle Control which matches engine power and torque to application requirements.
  • The powershift transmission and machine balanced design ensures that you get full drawbar power to the ground with the Cat C7.1 engine.
  • The all-wheel drive (AWD) option assists with traction and maneuvering in loose material. The increased power with all-wheel drive handles rough terrain with extra traction for better productivity.
  • The hydraulic system makes the machines more precise and predictable for a consistent grade.
  • The Digital Blade Slope Meter option shows you the grade without relying on manual grade checkers.
  • Product Link™ provides location, machine hours, fuel usage, productivity, idle time, diagnostic codes, and other machine data on demand through the VisionLink® online interface, which helps you improve jobsite efficiency with lower operating costs.

WORK IN COMFORT

  • Choose your comfort level in the cab with standard, mechanical suspension or air suspension seat.
  • Easily adjust the control console and steering wheel.
  • The high capacity Heating, Ventilation and Air Conditioning (HVAC) system option circulates fresh air, prevents dust entry and keeps windows from fogging.
  • Easily add a radio to the cab using the built-in mounting location option.

LONG TERM VALUE AND DURABILITY

  • Drawbar circle moldboard stays factory tight providing precision grading pass after pass.
  • Machine structure is built for a long life. It’s designed to use several types of work tools, such as a front blade.
  • Slip clutch option protects the circle drive if the machine strikes an immovable object.
  • Front axle maximizes bearing life while also minimizing maintenance.
  • Reduce daily greasing requirements and costly repairs to your circle and pinion with Circle Saver option.

SAFELY HOME EVERY DAY

  • See what’s behind you with the rear camera option. The dedicated display can be always on to ensure a safe work environment.
  • The heated lens keeps the rearview camera clear in cold and wet conditions.
  • In the event of an engine stall, count on the secondary steering system option to help stop the machine safely.
  • Use three points of contact when entering and exiting the machine with strategically placed walk ways and grab rails.
  • Ground level engine shut-off switch stops all fuel to the engine when activated and shuts down the machine.
  • See the rear of your machine with side and rearview mirrors.
  • Work past sundown using the strategically placed lights for night time visibility.
  • Keep your work site safer with Cat GRADE Digital Blade Slope Meter to reduce the need for manual grade checking with working machines.

SAVE MAINTENANCE TIME

  • Filters, such as fuel, engine air, and oil filters, are grouped together for easy access and preventative maintenance.
  • Maintain roads with the standard drawbar circle moldboard with hardened circle teeth for increased durability. Adding a separate line with replaceable wear inserts helps to sustain factory tightness.
  • Hydraulic brakes are well oiled to keep them maintenance free.
  • The standard bottom guard shields the transmission and filter. Optional guarding protects your machine from damage in demanding applications.

EXPAND YOUR CAPABILITIES

  • Improve the performance and efficiency of your machine with the counterweight or push block option.
  • Ripper and scarifier options are available to assist with grading hard ground.
  • The front lift group option is ready for attachments like the straight or angle front blade.
  • For more road coverage, add a moldboard extension to add 605 mm (24 in).

Standard Equipment

  • NOTE
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Cab
    • Standard Seat
    • Steering Wheel/Lever Controls
    • Base Cab
    • Information Display Screen
    • Halogen Lighting
    • Entertainment Radio Ready
    • Product Link
  • Engine
    • Cat C7.1
    • ECO Mode
    • On-Demand Fan
  • Drawbar Circle Moldboard
    • Standard
  • Safety
    • Parking brake
    • Signaling/warning horn
    • Rearview mirror
    • Hydraulic brakes
    • Sideview mirrors
    • Walkways and Grab Rails
    • Walkways and Grab Rails
  • VERSATILITY
    • Front Bolster

Optional Equipment

  • NOTE
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Cab
    • Mechanical Suspension Seat
    • Air Suspension Seat
    • ROPS/FOPS
    • Heating/Cooling Cab System
    • Rear Wiper
    • Canopy
    • Cab Plus
    • Rear Window Screen
    • Front Wipers
    • Digital Blade Slope Meter
  • Drawbar Circle Moldboard
    • Circle Drive Slip Clutch
    • Circle Saver
  • Safety
    • Rearview camera
    • Secondary steering system
  • Versatility
    • Counterweight
    • Push Block
    • Ripper
    • Scarifier
    • Front Lift Group
    • Front Blade
    • Front Blade
  • SAFETY
    • Cat Detect with Vision System
  • VERSATILITY
    • Counterweight
    • Push Block
    • Front Lift Group
    • Mast Type - Snow Wing
    • Mast-Less - Snow Wing
    • Ripper/Scarifier
    • Auxiliary Hydraulic Lines
    • Moldboard Extension
    • Front Blade
  • Engine
    • All-Wheel Drive (AWD)