technicial_specifications
| Tractor Engine | Cat® C18 |
| Scraper Engine | Cat® C15 |
| Flywheel Power - Tractor/Scraper | 469kW (637 hp) / 353 kW (479 hp) |
| Net Power | 469 kW/637 hp |
| Gross Power (SAE J1995) | 475 kW |
| Net Power (ISO 14396) | 469 kW |
| Bore | 145 mm |
| Stroke | 183 mm |
| Displacement | 18.1 l |
| Net Power (SAE J1349/ISO 9249) | 436 kW |
| Net Power (SAE J1349/ISO 9249) | 436 kW |
| Scraper Capacity - Heaped | 33.6 m³ |
| Rated Load | 47174 kg |
| Capacity - Struck | 24.5 m³ |
| Depth of Cut - Maximum | 417 mm |
| Width - Cut - To Router Bits | 3.8 m |
| Ground Clearance - Maximum | 0.7 m |
| Depth of Spread - Maximum | 660 mm |
| Apron Opening | 2337 mm |
| Apron Closure Force | 176 kN |
| Hyd. Penetration Force - 657G | 542 kN |
| Top Speed - Loaded | 56.1 km/h |
| Net Power | 353 kW/447 hp |
| Gross Power (SAE J1995) | 359 kW |
| Net Power (ISO 14396) | 353 kW |
| Bore | 137.2 mm |
| Stroke | 171.5 mm |
| Displacement | 15.2 l |
| Net Power (SAE J1349/ISO 9249) | 333 kW |
| Total Shipping | 72804 kg |
| Tractor Shipping | 42472 kg |
| Scraper Shipping | 29061 kg |
| Total Operating - Empty | 74500 kg |
| Front Axle | 42566 kg |
| Rear Axle | 30238 kg |
| Total Operating - Loaded | 121700 kg |
| Front Axle - Loaded | 60856 kg |
| Rear Axle - Loaded | 59121 kg |
| Width - Overall Machine | 4.36 m |
| Width - Tractor | 3.62 m |
| Width - Rear Tire Center Lines | 2.81 m |
| Width - Inside of Bowl | 3.68 m |
| Width - Outside Bowl - Shipping Width | 3.91 m |
| Height - Overall Shipping | 4.66 m |
| Height - Top of Cab | 3.92 m |
| Ground Clearance - Tractor | 0.7 m |
| Front of Tractor to Front Axle | 4.63 m |
| Axle to Vertical Hitch Pin | 0.55 m |
| Height - Scraper Blade Maximum | 0.66 m |
| Wheel Base | 9.96 m |
| Length - Overall Machine | 17.05 m |
| Rear Axle - Rear of Machine | 2.46 m |
| 1 Forward | 5.7 km/h |
| 2 Forward | 10.5 km/h |
| 3 Forward | 12.5 km/h |
| 4 Forward | 17 km/h |
| 5 Forward | 22.8 km/h |
| 6 Forward | 30.9 km/h |
| 7 Forward | 41.4 km/h |
| 8 Forward | 56.1 km/h |
| Reverse | 10.8 km/h |
| Top Speed - Loaded | 56.1 km/h |
| Width - 180° Turn - Right | 13.85 m |
| Width - 180° Turn - Left | 14.5 m |
| Steering Angle - Right | 90 |
| Steering Angle - Left | 85 |
| Crankcase | 38 l |
| Transmission | 136 l |
| Final Drive - Each | 29.5 l |
| Cooling System | 88.6 l |
| Hydraulic Reservoir | 150 l |
| Windshield Washer | 5 l |
| Differential | 136 l |
| Bowl Cylinder Bore | 180 mm |
| Bowl Cylinder Stroke | 950 mm |
| Apron Cylinder Bore | 180 mm |
| Apron Cylinder Stroke | 759.5 mm |
| Ejector Cylinder Stroke (Stage 1/ Stage 2) | 973.5 mm |
| Steering Circuit (@ High Idle) | 288 L/min |
| Implement Circuit (@ High Idle) | 517 L/min |
| Cushion Hitch Circuit | 74 L/min |
| Secondary Steering Circuit | 55 l/hr |
| Relief Valve - Steering Circuit | 13500 kPa |
| Relief Valve - Implement Circuit | 13780 kPa |
| Compensator Settings - Cushion Hitch Circuit | 20700 kPa |
| Fuel Tank | 1628 l |
| Crankcase | 34 l |
| Transmission | 121 l |
| Final Drive - Each | 30 l |
| Cooling System | 63.2 l |
| Differential | 168 l |
advantages_and_features
BE MORE PRODUCTIVE
- Advanced Productivity Electronic Control System (APECS) allows the engine and transmission to communicate on a high level. This communication enables the machine to better utilize the power and torque the engine is producing. The net result is moving more material.
- Use Ground Speed Control to set the desired top speed, and the machine will find the gear that works best for the engine and the transmission, providing a lower fuel burn.
- The Machine Speed Limit feature replaces Top Gear Selection.
- Auto-Stall assists in quickly bringing the transmission to an operating temperature at start-up when the machine is working in a cold climate regions.
- Cat Payload for scrapers is an earthmoving solution for optimal payload and job site efficiency. Cat Payload achieves on-the-go weighing by using bowl lift cylinder pressure during the loaded haul segment. Cat Payload is optimized to be used with Sequence Assist, which provides increased productivity with less operator effort.
WORK IN COMFORT
- Steer with less effort with the newly designed High-Pressure Steering system.
- Reduce up to 14 individual operator commands per cycle with
Sequence Assist (optional attachment). - Enjoy interior improvements and a more ergonomic work environment
with a 21% larger cab than the 657 G-Series cabs. - Intuitive, ergonomic controls with multifunction display keep operators focused on their work.
- Maintain desired cab temperature with Automatic
Temperature Control.
DESIGNED FOR SAFETY
- Get in and out of the cab easier with the new powered access
ladder system. - Enhance an operator’s awareness of the site surroundings with the
Work Area Vision System (WAVS). - Convenient ground-level access to fuel fill and multiple
maintenance points, ensuring safer and more efficient service. - Seat belt indicator provides visual and audible alerts when the seat belt is not in use.
- The fuel fill, fuel filter, engine oil filter, engine oil change, and water drain are easily accessible at ground level.
EASY TO OPERATE
- Cat Advance Ride Management (ARM) seat suspension reduces end stroke movement of the load cylinder for a smoother ride.
- Engine overspeed protection will automatically engage with no operator input when the machine is in eighth gear. The machine will assist in slowing the machine speed by canceling the throttle command and engaging the engine compression brake.
- The spacious cab features easy, intuitive controls and excellent
visibility. The cab provides a comfortable working environment for
all-day operation.
INTEGRATED CAT TECHNOLOGIES
- Access information anytime, anywhere with VisionLinkTM –
use it to make informed decisions that boost productivity, lower
costs, simplify maintenance, and improve safety and security
on your jobsite. - Product Link™ collects machine data that can be viewed online
through web and mobile applications (optional attachment). - Hit target grade faster and more accurately with Cat Grade
technologies. Finish jobs in fewer passes and with less operator
effort, saving you time and helping to increase profit. - Monitor, manage, and enhance jobsite operations.
EXECUTE EFFICIENCY
- The Cat C18 tractor and C15 scraper engines meet U.S. EPA Tier 4 Final and EU Stage V emission standards, contributing to
lower fuel consumption. - The tractor hydraulic on-demand fan helps assist in lower
fuel consumption. - Cat Grade (optional attachment) intelligently ensures the machine
does not cut below grade in a cut area or overfill in the fill area.
standard_equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
ELECTRICAL
- Alarm, backup
- Alternator, 115 amp - tractor engine
- Alternator, 65 amp - scraper engine
- Batteries Tractor (4), 12V Maintenance Free, High Output
- Batteries Scraper (4), 12V Maintenance Free, High Output
- Electrical System, 24V
- Lighting System - Tractor
- Lighting System - Scraper
- Starting Receptacle - tractor and scraper engines
-
OPERATOR ENVIRONMENT
- Air Conditioner (includes heater and defroster)
- Automotive style fuse panel with fuse puller
- Lunch box platform with holding strap
- Coat Hook
- Cup holder
- Diagnostic Connection Port (12V)
- Dome Courtesy Light
- Engine speed lock
- Fan defroster
- Gauge Group
- Horn
- Implement Control Joystick
- Rearview Mirrors
- Radio Ready
- 2 radio openings, speakers, and 5-amp converter
- ROPS Cab with Sound Suppression and Pressurization
- Static Seatbelt, 2 piece
- Scraper Engine Controls
- Seat, Air Suspension, Cat Advanced Ride Management
- Steering Wheel - tilt and telescoping
- Storage Compartment
- Transmission Hold
- Windows - sliding side
- Windshield - laminated glass
- Windshield Wiper/Washer - front and rear
- Wrist Rest/Grab Handle
-
POWER TRAIN
- Tractor
- Scraper
-
OTHER STANDARD EQUIPMENT
- Tractor
- Scraper
