Business Machines

Engine

Engine Model	— Cat C4.4
Net Power	— 101 kW
Bore	— 105 mm
Stroke	— 127 mm
Displacement	— 4.4 l
Maximum Torque - 1,400 rpm	— 550 N·m
Number of Cylinders - In Line	— 4
Ratings	— 2000 r/min
Engine Power - ISO 14396 Net - Metric	— 108 kW (147 hp)
Engine Power - ISO 9249/SAE J1349 Net - Metric	— 101 kW (137 hp)
Emissions	— Meets China Nonroad Stage III emission standards, equivalent to Tier 3/Stage IIIA.

Drive

Maximum Travel Speed

— 37 km/h

Transmission

Drawbar Pull	— 76 kN
Maximum Gradeability (14 500 kg)	— 58%
Maximum Forward/Reverse - 2nd Gear	— 37 km/h

Service Refill Capacities

Engine Crankcase	— 8 l
Cooling System	— 31 l
Fuel Tank - Total Capacity	— 235 l

Weights

Weight - One-Piece Boom* (either 4500 mm or 4815 mm* boom) - Blade Front and Outriggers Rear	— 14750 kg
Weight - Sticks - Medium (2300 mm)	— 390 kg
Weight - VA Boom* - Rear Blade Only	— 14200 kg
Weight - VA Boom* - Blade Front and Outriggers Rear	— 15100 kg
Weight - Sticks - Short (2000 mm)	— 370 kg
Operating Weight	— 13 500 to 15 200 kg (29,762 to 33,510 lb)
Weight - Standard Counterweight	— 2900 kg
Weight - One-Piece Boom* (either 4500 mm or 4815 mm* boom) - Rear Blade Only	— 13800 kg
Weight - Optional Counterweight	— 3300 kg
Note	— *Weight includes medium stick, 3300 kg counterweight, with full fuel tank, operator, and a 450 kg bucket. Weight varies depending on configuration.

Swing Mechanism

Maximum Swing Torque	— 36 kN·m
Maximum Swing Speed	— 9.8 r/min

Hydraulic System

Maximum Flow - Swing Mechanism	— 78 l/min
Maximum Flow - Auxiliary Circuit - Medium Pressure	— 40 l/min
Maximum Pressure - Implement Circuit - Normal and Travel Circuit	— 350 bar
Tank Capacity	— 95 l
Swing Mechanism	— 350 bar
System	— 180 l
Maximum Flow - Implement/Travel Circuit	— 180 l/min
Maximum Pressure - Auxiliary Circuit - High Pressure	— 350 bar
Maximum Pressure - Implement Circuit - Heavy Lift	— 375 bar
Maximum Flow - Auxiliary Circuit - High Pressure	— 180 l/min
Maximum Pressure - Auxiliary Circuit - Medium Pressure	— 185 bar

Undercarriage

Maximum Steering Angle	— 35°
Axle Clearance	— 370 mm
Oscillation Axle Angle	— ±8.5°

Working Ranges - 5020 mm VA Boom; 2300 mm Stick

Bucket Forces - ISO 6015	— 103 kN
Stick Forces - ISO 6015	— 69 kN
Digging Depth	— 5300 mm
Dump Height	— 7210 mm
Reach at Ground Level	— 8580 mm
Digging Height	— 9670 mm
Note (1)	— Range values are calculated with a bucket 1000 mm/0.6 m3 with a tip radius of 1225 mm. Values refer to stick nose pin.
Note (2)	— Bucket and stick force values are calculated with heavy lift on and a cutting edge of 1111 mm.

Working Ranges - 4815 mm One-Piece Boom; 2000 mm Stick

Reach at Ground Level	— 8080 mm
Digging Height	— 8480 mm
Bucket Forces - ISO 6015	— 103 kN
Digging Depth	— 4840 mm
Note (1)	— Range values are calculated with a bucket 1000 mm/0.6 m3 with a tip radius of 1225 mm. Values refer to stick nose pin.
Stick Forces - ISO 6015	— 76 kN
Dump Height	— 6060 mm
Note (2)	— Bucket and stick force values are calculated with heavy lift on and a cutting edge of 1111 mm.

Working Ranges - 4500 mm One-Piece Boom*; 2300 mm Stick

Reach at Ground Level	— 7940 mm
Note (1)	— Range values are calculated with a bucket 1000 mm/0.6 m3 with a tip radius of 1225 mm. Values refer to stick nose pin.
Digging Height	— 8060 mm
Digging Depth	— 4810 mm
Stick Forces - ISO 6015	— 69 kN
Note (3)	— *For Asia, China, Taiwan and Indonesia only.
Note (2)	— Bucket and stick force values are calculated with heavy lift on and a cutting edge of 1111 mm.
Bucket Forces - ISO 6015	— 103 kN
Dump Height	— 5890 mm

Working Ranges - 4500 mm One-Piece Boom*; 2000 mm Stick

Digging Depth	— 4520 mm
Note (3)	— *For Asia, China, Taiwan and Indonesia only.
Note (1)	— Range values are calculated with a bucket 1000 mm/0.6 m3 with a tip radius of 1225 mm. Values refer to stick nose pin.
Reach at Ground Level	— 7770 mm
Stick Forces - ISO 6015	— 76 kN
Bucket Forces - ISO 6015	— 103 kN
Dump Height	— 5810 mm
Digging Height	— 8040 mm
Note (2)	— Bucket and stick force values are calculated with heavy lift on and a cutting edge of 1111 mm.

Working Ranges - 5020 mm VA Boom; 2000 mm Stick

Stick Forces - ISO 6015	— 76 kN
Dump Height	— 7060 mm
Bucket Forces - ISO 6015	— 103 kN
Note (2)	— Bucket and stick force values are calculated with heavy lift on and a cutting edge of 1111 mm.
Reach at Ground Level	— 8330 mm
Digging Height	— 9520 mm
Digging Depth	— 5010 mm
Note (1)	— Range values are calculated with a bucket 1000 mm/0.6 m3 with a tip radius of 1225 mm. Values refer to stick nose pin.

Working Ranges - 4815 mm One-Piece Boom; 2300 mm Stick

Digging Depth	— 5140 mm
Dump Height	— 6120 mm
Stick Forces - ISO 6015	— 69 kN
Bucket Forces - ISO 6015	— 103 kN
Reach at Ground Level	— 8320 mm
Note (1)	— Range values are calculated with a bucket 1000 mm/0.6 m3 with a tip radius of 1225 mm. Values refer to stick nose pin.
Digging Height	— 8580 mm
Note (2)	— Bucket and stick force values are calculated with heavy lift on and a cutting edge of 1111 mm.